YOSH Digital Tire Pressure Gauge 200 PSI Backlit LCD Digital Read-Out Tyre Checker with Flexible Hose Valve Caps Heavy Duty Compatible with Most Vehicles for SUV Motorcycle and More

First, the manual says to listen for a beep when the unit is 1st turned on, There was no beeping on mine. Secondly, I took the PSI reading on a tire, waited for a minute, and then checked the same reading again. Both readings were different.

It's very accurate but I had to replace the battery already

I purchased this for more precise readings. It will give it to you, but,it only reads while you are holding it onto the valve. As soon as you leave go of the valve the air goes out. I would think it would hold the reading until you pushed the relief button. The other issue is the how small the chuck is. Hard to hold on to.

I would not recommend this. It was great the first couple times I used it but now a year later and it leaks air through all the seals and it's impossible to get a reading. In the trash it goes. What a waste.

it hard to read, i return it , and purchase better product, i should listen the review said.

Product works great, only downfall,the pressure release valve stopped working within two weeks.

Very easy to use, lights up for night use as well. I use this specifically for my bike but I believe I'll order another just for my jeep.

Gauge is ok and accurate. Small, round connector swivels. Makes it difficult to maintain connection to check pressure.

The media could not be loaded.  My purchase arrived promptly and in eco-friendly packaging. The packing itself is clean in design and looks both modern and aesthetically pleasing. Inside the packing, you get the tire pressure gauge itself, 4 replacement valve covers and 2 additional Schrader valves which are always useful to have.The product itself features an LCD display, Select button, a Power button and a pressure release button. It also features a swivel chuck, which allows for easy connection to the valve. With a rubber hose length of 20cm, you can be sure that you can reach the valve on the tire itself.Using the tire pressure gauge is simple, firstly press the power button to turn the gauge on then, press the select button in order to select the correct setting. Secondly, remove the ire valve cap, place the pressure gauge onto the valve, ensure that you press down hard enough to make a sealed connection. Thirdly, hold the connection between 3-5 seconds in order for the reading to be stabilised and take that number as the result. When you have removed the gauge, press the pressure release button in order to reset the device.The gauge itself supports up to 200psi, which is more than necessary for any bike, car or van. The small design allows for easy storage in either your vehicle or in a toolbox, without an issue. The LCD is clear and easy to read and is protected by a rubber surround, which helps protect against drops and scratches.Side notes:The gauge supports the following units of measurement:PSI, BAR, MPA, KG/CM²All YOSH products come with an 18-month warranty, which can be extended to lifetime following the registration of your product. Should you encounter any problems, the excellent customer support team will be there to help.

I was a little concerned reading all the reviews about dodgy batteries, but went with the confidence in Amazon customer service should there be an issue.I needn't have worried, this worked just great out of the box! The unit is light, easy to ready, and seems to be accurate too (especially considering its price versus some of the super calibrated devices you can buy!).The rubber casing on the gauge will protect it from bumps, the hose and connector feel of high quality, and in use, I was able to check each tyre in just a few seconds. I check my tyres weekly given I do around a thousand miles - just having this reassurance is great, besides knowing you're getting the best life from you tyres.Based on a weekly check, I'm saving myself a pound a go at my local petrol station, so this will have paid for itself in no time at all, plus the convenience of doing this on my drive.If, like me, you were worried about the battery situation, I also added a card of 6x CR2032 Panasonic batteries to my order - they came in under £3, and have a long shelf life on them. Just add them and chuck them in the garage in readiness.Buy it - you wont regret it :)

The gauge arrived and did not work! I suspected the battery to be at fault. No information regarding the whereabouts of the battery in the instructions! Being fairly competent, I found what I thought to be THE ONLY battery compartment under the rubber anti - shock covering. The CR2032 battery showed zero volts on my meter.I replaced the battery with a new one... it worked. Later I realised the instructions referred to 2XCR2032 batteries, so also replaced the second battery which was reading 0.45v! So how do I feel? Somewhat shortchanged and disappointed, having paid just over £3.00 for quality replacement batteries! I could have returned the whole unit to Amazon but decided the effort, inconvenience, and energy wastage not worth it, as I now had a working, easy to use, tyre pressure gauge. Phew!

It’s fiddly. Even when it’s turned on, many times it won’t refresh, and you have to keep letting out small amounts of air to wake it up.Worse, though, is that it eats batteries. Each new battery only lasts a few weeks before going flat on this thing, even without any usage! So whenever you need it, it’s flat. Useless! Do not buy.

Exactly as described, even came with extra dust caps, Easy to use on motorcycle wheels, however only used once since purchased and the installed batteries are dead, having to purchase replacements so it will function again..