WC Wicked Cushions Replacement Ear Pads for Beats Studio 2 & 3 (B0501, B0500) Wired & Wireless | Does NOT Fit Beats Solo | Softer PU Leather, Enhanced Foam & Stronger Adhesive | Black

1. The old earpads of my Beats 2 Studio Wireless headphones, model B0501, had become flaky beyond the point of no return and replacement earpads were needed as the headphones still worked perfectly.2. Watch the videos on YouTube on how to replace earpads so that you can have an idea and build confidence and see the process from beginning to end. The Wicked Cushions video is the best but there are other videos by Martin's Tech Blog, Brian MacDuff and another one by Wicked Cushions with the Stewie Griffin voice. (but that's an older video where the 3M adhesive doesnt have the lip)3. Scale of difficulty. 4.5 out of 10 if you watch the video/s and follow the instructions. The difficulty is in removing the plastic base of the old earpad.4. These pads come in a resealable pouch. Inside the pouch are the 2 replacement pads, 2 wet alcohol wipes and paper replacement/installation instructions.5. The instructions come with a QR code which you can scan with your phone for the Wicked Cushions video/YouTube instructions on how to replace the pads.7. I decided to scan the QR code with my phone camera and the video opened up immediately.8. To remove the old earpads, these videos all showed the person working on the replacement using a strong butter stainless steel knife. It's strong enough to use while having a dull side, meaning that the chances of cutting onself whilst performing the replacement is reduced significantly.9. I placed the dull non-serated edge of the knife on the inner part of the plastic edge between the old earpad and the headphone piece.10. Once I did this, I was able to move the dull edge of the knife around the edges of the old earpad and one part of the earpad (with the outer foam and soft inner cover) came loose. The other plastic base (part of the older earpad) remained glued on the rest of the headphone.11. To remove the plastic base that holds the foam part of the old earpad, use the dull non-serated part of the butter knife to remove it. Make sure that you don't scratch the outer visible part of the black part of the headphone. You will most likely scratch the inside of the bare part of the inside of the headphone part that houses the speaker/driver but that part will be covered by the new earpad.12. You will need to use a bit of force to pry the plastic base off the earpad as it is glued on there tight!13. Once the remaining plastic base of the old earpad is off, its time to clean the headphone part where the new earpad is going to rest on.14. I used my fingers to pull off and roll off the remaining glue off the headphone.15. Once all the glue is off and there is no glue residue, dirt or debris on the headphone, then it's time to clean the headphone surface (where the new earpad is going to rest on) with the provided alcohol pad. I also had in stock some First Choose wet dry cleaning wipes which I used, as the provided alcohol pad/s might not be enough.16. Once the surface is clean, then its time to place the new earpad on. Before placing the new earpad, place it (dry test it) on the headphone, seam on the bottom, before removing the adhesive protection cover to ensure that you are placing the correct earpad on the correct side.17. I started installing the earpad that has the indent/cutout where the USB port cable connects to the headphone.18. I removed/peeled off the 3M earpad adhesive using the lip provided (some of the other earpads from other manufacturers don't have this lip) and lined up the earpad, seam on the bottom to the dowels of the headphone and holes on new earpads and pressed the earpad with my fingers firmly all round the earpad to ensure that the inner part of the earpad connects/holds tightly to the outer part of the headphone that houses the speaker.19. I repeated this process for the earpad on the other side, removing the 3M adhesive, aligning the dowels on headphone to the holes on earpads, seam on the bottom and pressed the earpad to the headphone.20. Once the earpads are on, place them on a set of books (or old VHS tapes which I used!) and clamp them on there for 12 hours. My width between earpads was 7.5 (seven and a half) inches.21. Once the 'drying out' clamping period of 12 hours was over, it was time to test the headphones again.22. The earpads work as well as the previous OEM ones. They are comfortable, have similar noise isolation and don't cause discomfort when you use them for a long time.23. They also fit perfectly into the headphone case as they are pretty much the same size as the original.24. I grabbed the Titanium color as it matched the color of the original earpads to a T. No one can notice the difference as the color is pretty much the same. They don't scream 'replacement' or 'aftermarket.'

We ordered these to repair my son's Beats headphones. Once they arrived, we scanned the QR code and watched a short video on how to replace the ear cushions. The process was easy to complete thanks to the guide. After completing the installation, we placed the headphones into position as requested, and let them sit to secure the adhesive. We are VERY pleased with the new covers!! The OLD covers were falling apart, and leaving black flecks on my sons face, clothing and furniture. The new ones are soft, comfortable, and well worth the price paid! Thank you for such a great replacement product, especially, one that I had no idea existed!! I was about to purchase a new pair of headphones, and now that saves me the cost! Perfect!!

Once you watch the video, you can find instructions on how to switch them out. It’s a straightforward process that’s easy to do and results in great results.

I followed the “How To” on You Tube and was able to put the new ear cushions on my Beats! They are perfect!

My old cushions on my beats headphones were so worn out they were flaking off. We bought these to replace those because I didn’t wanna buy $500 headphones right now. I feel like not only is it more comfortable than the original beats headphone cushions, the sound sounds better. It’s incredible! 10 out of 10 would recommend!!

I purchased these ear pads for my Beats Studio earphones. The original ear pads crumbled and dissolved. I was ready to toss my Beats when i found these ear pads replacements i watched the video and decided to order them. The package included a QR code to access online video instructions and alcohol pads to clean off the glue after removing the old ear pads. Instructions were easy to follow, ear pads fir perfectly, Beats are good as new

I am very happy with my purchase. They look like high quality and matched my Studio Beats perfectly.

Love these! Truly saved my beats. I stopped using my headphones because of the leather peeling. Now I have a new pair. I love love love how they look and super easy to install!